Eyecatcher JellyTec UG
IndexretrofitWeighing SystemsPenko
JellyTec
Machines and Plants
GRAVOMAT
pressure dissolver
Dosing Unit
Raw Material Dosing
candy sorting
retrofit
Weighing Systems
Bosch_SMP
Penko
Simon_MDS
Switch Cabinet
Dosing Unit
S7-300 Danfoss FU
Siemens C613
faces
Contact


Deutsche Seite
Untitled Document

Conversion of a Penko weighing control unit with Sartorius BATCH-X5

A conversion of a Penko weighing control unit, e.g. installed by ter Braak, requires new wiring of the complete dosing controller. In this case ter Braak used 24 V AC voltage as control voltage. The dosing unit BATCH-X5 used for this application needs to be connected to the “old” hardware via connecting relay.
The weighing process requires the following dosing functions:
- Dosing of liquid components, principally in coarse stream
- Dosing of sugar in coarse and fine stream
- Starting of agitator 1 and/or agitator 2 during the dosing process of the coarse stream, e.g. for blending in of crystalline components
- Starting of agitator 1 and/or agitator 2 for blending as mixing time
- With filled storage container: permanent operation of agitator 1 and/or agitator 2 during standby period before receiving the discharge signal
- With filled storage container: intermittent operation of agitator 1 and/or 2 during standby period before receiving the discharge signal

This exchange option uses the BATCH-X5 equipment as a stand-alone solution. As a consequence, there is no connection to a PC-controlled recipe and quantity management system. The data for recipes and components are transfered into the dosing control system via notebook. Consumed quantities (batch report and production report) can be printed via serial interface on a standard printer.

   
Batch X5 Front new


Penko Front old


Batch X5 Back new


Penko Back old
Schokoma HomeEmailImpressum